Industrial Oven

FE & FG Series

industrial oven

The industrial oven heated chamber is usually used for a variety of industrial applications such as curing, baking or drying components, parts and/or even final products.

Our industrial oven meet the requirements of NFPA86. They are class B ovens, i.e. they are operating at atmospheric pressure. The industrial oven must not contain any volatile, flammable, or combustible material otherwise additional features must be added in order to meet the requirements for class A ovens.

 

How it Work

When the operator closes the access hatches and switches the industrial oven on, the air within it is heated by a heater. The heated air is then circulated throughout the oven by a fan in order to distribute the temperature as evenly as possible. Once the industrial oven reaches its setpoint, it switches to its minimum output in order to maintain a stable temperature. If necessary a cool off process is initiated by venting the hot air via an exhaust pipe.

 

Electrical Specifications

Control Panel

  • Terminals for incoming power (disconnect not included)
  • Temperature controller 1/16 din with Type J Thermocouple
  • Heating and ventilation switches
  • Pilot Light
  • Control panel Nema 1 meeting the CSA requirements

Other

  • Operating on 600V, 3-phases, 60Hz
  • Completely wired and tested

Optional Features

  • Alarm Relay
  • Alarm Strobe Light
  • Alarm Buzzer
  • Open Door Detector
  • Circular Chart Recorder
  • Digital Daily Time Switch, 7 days 24 hours
  • Hour Meter for Blower
  • Incoming Disconnect with Fuses
  • Control Panel Nema 12
  • Temperature Controller1/8 din or ¼ din
  • Programmable Temperature Controller

Mechanical Specfications

Blower

  • CFM as specified for each model, 2″w.g. @ 70F
  • Selected AIREX SXB Model, class 2S
  • Backward Inclined
  • Shaft Cooler

Insulation

  • Mineral Wool ROXUL RHF60
  • Maximum Service Temperature of 1200°F
  • 4″ Insulation for Walls and Ceiling and 2” Floor Insulation

Paint

  • Phosphate Surface Preparation
  • Two Polyurethane Coatings

Motor

  • High Efficiency TEFC
  • Between 1.5 and 10 HP
  • 1800 or 3600 RPM depending on model
  • OSHA Guards
  • V-belts type B

Gasket

  • Glass Fibre High Temperature Gasket with Wiremesh Inconel Insert
  • Maximum Service Temperature 1000°F

Handles/Hinges

  • BRIXON 2PC1
  • 3 to 4 Industrial Caliber Hinges

Casing

  • External (Painted): Steel ASTM36 20GA
  • Internal: Galvanized Steel 18GA
  • Internal Reinforcement: Steel ASTM36 18GA
  • Reinforcements are placed at Insulation Extremities, i.e. every24”. Truck Wheel Guide

Optional Features

  • Additional Features necessary for Class A Ovens
  • Power Exhaust
  • Explosion Hatch and Venting
  • Exhaust Stack
  • Thermocouple Guard
  • Motor Guard
  • Shaft/ Bearing Guard
  • Sliding Doors
  • Automatic Door Opening Device

Technical Data

industrial oven specification

Model

Maximum
Temperature

(F)

Dimensions Heat Input
Blower Insulation
Interior
(H x D x W)
Working Space
(pi3)
Exterior
(H x D x W)
kW
(Electrical Oven)
BTU/hr
(Gas Oven)
CFM HP
644 500 72"x48"x48" 96 78"x74"x64" 20 000 250 000 2083 1,5 4"
665 500 72"x72"x60" 180 78"x101"x76" 30 000 300 000 2805 2 4"
685 500 72"x96"x60" 240 78"x128"x76" 40 000 350 000 3570 3 4"
666 500 72"x72"x72" 216 78"x104"x88" 40 000 350 000 3570 3 4"
686 500 72"x96"x72" 288 78"x130"x92" 60 000 400 000 5100 5 4"
6106 500 72"x120"x72" 360 78"x158"x96" 60 000 600 000 6630 5 4"
6126 500 72"x144"x72" 432 78"x182"x100" 90 000 600 000 8500 7,5 4"
886 500 96"x96"x72" 384 102"x134"x92" 60 000 600 000 6630 5 4"
787 500 84"x96"x84" 392 90"x134"x104" 60 000 600 000 6630 5 4"
7107 500 84"x120"x84" 490 90"x158"x108" 90 000 600 000 8500 7,5 4"
7127 500 84"x144"x84" 588 90"x184"x112" 120 000 700 000 10625 7,5 4"
8108 500 96"x120"x96" 640 102"x160"x120" 120 000 800 000 10625 7,5 4"
8128 500 96"x144"x96" 768 102"x195"x124" 150 000 1 200 000 14875 10 4"
  • Bombardier aéronautique

    (Montréal, Québec)

    Avionics manufacturer.

    High temperature environmental booth for the heat treatment of varnish on aviation parts.

  • Soprema

    (Drummondville, Québec)

    Manufacturing company of waterproofing products.

    Electric industrial oven for the heat treatment of chemicals products.

  • Bombardier aéronautique

    (Montréal, Québec)

    Avionics manufacturer.

    High temperature environmental booth for the heat treatment of varnish on aviation parts.

  • Joker BrandZ inc

    (Toronto, Ontario)

    Candy manufacturer.

    Kiln for white almond sweets.

  • Bombardier aéronautique

    (Montréal, Québec)

    Avionics manufacturer.

    High temperature environmental booth for the heat treatment of varnish on aviation parts.

1 2 3 4 5

Download Electrical Oven Brochure Download Gas Oven Brochure Contact

Get in touch

If you have any questions or request, please contact us by phone or by filling the form below.

Toll Free: +1-800-263-2303

Full Name(*)
Invalid Input

Organization
Please type your Company name.

Email(*)
Invalid Input

Phone(*)
Invalid Input

Message(*)
Invalid Input

(*)
Invalid Input

Portal

 

Social